Engine oil leaks and smoke from exhaust

RAYADAM
Posts: 473
Joined: Wed Feb 23, 2005 1:32 pm
Location: Green Brook,NJ
Contact:

Post by RAYADAM »

Original poster(wish you would share your name) and Kieth ,you guys have 2 different engines.. Keith assuming you're talking about your E39 touring ,that is a M62TU ,the OP's vehicle is a N62 ,N62 is mostly a different design outside the fact they share the same displacement (4.4) and have 8 cylinders.
Ray
2011 X5d
2018 Shelby GT350

kbsilver
Posts: 413
Joined: Wed Sep 15, 2004 2:24 pm
Location: Morristown

Post by kbsilver »

Thanks Ray, I was not picking up on the differences. My comment about the CVV and separator then of course may not be correct. But in many cases a leak is a leak Unless BMW now uses miracle gaskets, they still age. I believe the basic layout is the same with timing chain covers and valve covers. Again because of differences there may not be Vanos Solenoid valve gaskets (and they were the real easy ones to change).
-Keith

'11 335D & '17 340GT

cgraff
Posts: 227
Joined: Thu Feb 10, 2005 3:23 pm
Contact:

Post by cgraff »

+1 on RAYADAM.

kbsilver: The M62TU is far different than the N62.

Higher mileage N62s are notorious for valve guide stem seals issues. Dealers will tell you they do them all the time.

The earlier M62s have the known leak issues (gaskets, valley pan, etc, etc, etc) that have been noted in prior posts.


-Chris

TimCircleBMW
Posts: 275
Joined: Tue Jan 31, 2006 6:48 pm
Contact:

YEs

Post by TimCircleBMW »

"We do them all the time" is true
Tim M

1995 BMW M5 Euro Daytona Violet
1985 Subaru BRAT GL
1992 Mercedes 300D
1998 Mercedes E300 Turbo Diesel
2021 Toyota Tundra 1794 TRD Offroad

pld21ski
Posts: 9
Joined: Thu Dec 06, 2012 9:06 pm

Post by pld21ski »

What is the estimated cost of repair to replace the valve guide seals ??

Post Reply