I have not idea what is the ABS inlet valve.
A few months ago I changed my brakes and RF wheel bearing, after I was finish the DSC, Brake, and ABS lights came on.
When I clear these lights, as I move the car, when I step on the brakes I feel the ABS buzzing, as I go back with my foot on the brakes, the light remain off, until I go forward. As I move the car forward the three lights would come back on.
The codes I get - Right Front Speed Sensor, or ABS Inlet Valve.
Could this be an ABS pump problem, I had the ABS module tested and it came back problem free.
Thank you
Nigel
2000 740il - ABS Inlet Valve error
-
- Posts: 123
- Joined: Mon Jan 17, 2005 3:19 pm
Problem Solved
It turned out to be the new hub I installed. It did not have the strip that allowed the ABS sensor to read it.