2004 745 Li (Rough Idling)
2004 745 Li (Rough Idling)
2004 745 Li with VANOS & Valvetronic. Vehicle is rough in morining when start engine until warms up. A little loud. Engine Idle Speed sometimes is up and down and sounds like 1 or 2 plus could be misfiring. Dealer states this is normal. Car is under warranty until 08/2008 and then is CPO until 08/2010. I have read articles that this could be an internal problem and could be costly. Dealer states it is fine. Anyone have the same problem?
-
- Posts: 154
- Joined: Sun May 20, 2007 4:05 pm
- Location: Hillsborough
- Contact:
I know you posted this a looooooooonnnggggggg time ago, but yes, we experience this in our 750i too. I'm sure its nothing to worry about, otherwise you'd see horror stories across the net. By accident, I posted over on Bimmerfest complaining about everything wrong about the car and a BMWNA rep posted back saying he would call us.. Surely enough the phone rang and it was BMWNA. A little strange eh? Anyway, they said the rough idle is fine and is nothing to worry about and answered some of the other questions.
Bottom line, they say its fine
Bottom line, they say its fine

Bryan
Mine:
-2008 VW Volkswagen Rabbit
-1999 Honda Accord
Not Mine:
-2008 BMW 328xi coupe (ED 4/21/08 )
-2006 BMW 750i (ED 7/27/06 )
Mine:
-2008 VW Volkswagen Rabbit
-1999 Honda Accord
Not Mine:
-2008 BMW 328xi coupe (ED 4/21/08 )
-2006 BMW 750i (ED 7/27/06 )
Common problem for the E65. I'm a BMW tech and I had a lot of complaints for the rough running problem. There is a problem with the valvetronic intermediate levers from production dates between 6/04 and 2/05. There is a updated lever for this issue. If your car falls into this date range, this might be the fix. Also I think you should get the software updated to the latest version. There is a lot of new fixes in the latest version.
-
- Posts: 154
- Joined: Sun May 20, 2007 4:05 pm
- Location: Hillsborough
- Contact:
-
- Posts: 275
- Joined: Tue Jan 31, 2006 6:48 pm
- Contact:
Who refuses to do updates? If you have a problem that BMW says an update of the DME will be the fix, there shouldn't be a problem performing it. Call me if you want to bring it in for the updated software. I am not sure about the valvetronic update, but there are a few bulletins pertaining to this problem (that BMW says is not a problem). One thing that will help is running Shell V-Power 93 fuel. Running this fuel is a big plus for this car.
Tim
Tim
Tim M
1995 BMW M5 Euro Daytona Violet
1985 Subaru BRAT GL
1992 Mercedes 300D
1998 Mercedes E300 Turbo Diesel
2021 Toyota Tundra 1794 TRD Offroad
1995 BMW M5 Euro Daytona Violet
1985 Subaru BRAT GL
1992 Mercedes 300D
1998 Mercedes E300 Turbo Diesel
2021 Toyota Tundra 1794 TRD Offroad
-
- Posts: 154
- Joined: Sun May 20, 2007 4:05 pm
- Location: Hillsborough
- Contact:
just to confirm, theres updates for a 2006 750i? If so I'll have my dad contact you via phone tomorrow.
Also, we do run the shell 93 octane gas.. Its amazing how many autox'ers I run into to get gas on Super Tuesdays.
Bryan
Also, we do run the shell 93 octane gas.. Its amazing how many autox'ers I run into to get gas on Super Tuesdays.

Bryan
Bryan
Mine:
-2008 VW Volkswagen Rabbit
-1999 Honda Accord
Not Mine:
-2008 BMW 328xi coupe (ED 4/21/08 )
-2006 BMW 750i (ED 7/27/06 )
Mine:
-2008 VW Volkswagen Rabbit
-1999 Honda Accord
Not Mine:
-2008 BMW 328xi coupe (ED 4/21/08 )
-2006 BMW 750i (ED 7/27/06 )
Software updates and levers, etc.
to: Jerry1NJ
My production date was 06/2004. The dealer (the actual foreman) has told me that there were no updates for this vehicle (last month) and the engine is fine. I do not buy this for one minute. If the vehicle is under warranty and BMW has to pay for this, then what is the problem. Where are you a tech? What is the #? Can I contact you?
TY
Dominic
My production date was 06/2004. The dealer (the actual foreman) has told me that there were no updates for this vehicle (last month) and the engine is fine. I do not buy this for one minute. If the vehicle is under warranty and BMW has to pay for this, then what is the problem. Where are you a tech? What is the #? Can I contact you?
TY
Dominic