Brand New TC Kline Bolt In Roll Bar e36 Coupe/Sedan

BJerolimic · Post by **BJerolimic** » Wed Mar 14, 2012 6:03 pm

BRAND NEW!!!

Never installed! Bought in late 2011 for my winter build however I have decided to go with a weld in custom rear half-cage that is CCA rules conforming in case I go racing in the future it's easier to finish the cage. This is known as the *best* bolt-in roll bar for an e36, search BimmerForums and you will see what I mean based on the reviews

Normally $795 + @ $150 shipping, and on sale now (wasn't on sale when I bought it) for $595 + shipping. Selling for $560 picked up with valid CCA membership card (any chapter)

Here is info about the bar:

http://bimmerhaus.com/rollbars/

comes with instructions and all hardware, has not been painted, primed nor even mocked up

mmarv · Post by **mmarv** » Thu Mar 15, 2012 11:30 am

BJerolimic wrote:BRAND NEW!!!

Never installed! Bought in late 2011 for my winter build however I have decided to go with a weld in custom rear half-cage that is CCA rules conforming in case I go racing in the future it's easier to finish the cage. This is known as the *best* bolt-in roll bar for an e36, search BimmerForums and you will see what I mean based on the reviews

Normally $795 + @ $150 shipping, and on sale now (wasn't on sale when I bought it) for $595 + shipping. Selling for $560 picked up with valid CCA membership card (any chapter)

Here is info about the bar:

http://bimmerhaus.com/rollbars/

comes with instructions and all hardware, has not been painted, primed nor even mocked up

You plan to cut off the roof or cut out the custom 4pt when you upgrade it? Only way to do the upper welds.

edw1 · Post by **edw1** » Thu Mar 15, 2012 11:40 am

Can I cut the holes in your roof?

BJerolimic · Post by **BJerolimic** » Thu Mar 15, 2012 11:53 am

edw1 wrote:Can I cut the holes in your roof?

if I ever do get to racing I will consider you for that role

edw1 · Post by **edw1** » Thu Mar 15, 2012 11:58 am

BJerolimic wrote:if I ever do get to racing I will consider you for that role

Who said anything about racing? I just like cutting holes in cars. I'll start with your M5.

mmarv · Post by **mmarv** » Thu Mar 15, 2012 1:21 pm

mmarv wrote: You plan to cut off the roof or cut out the custom 4pt when you upgrade it? Only way to do the upper welds.

Corrected.

There really is no way to make a 4pt into a full cage without some major surgery.

Suggest anyone thinking about it, to jump on this deal as steel tubing prices have skyrocketed.

BJerolimic · Post by **BJerolimic** » Thu Mar 15, 2012 1:33 pm

mmarv wrote:
mmarv wrote: You plan to cut off the roof or cut out the custom 4pt when you upgrade it? Only way to do the upper welds.
Corrected.

There really is no way to make a 4pt into a full cage without some major surgery.

Suggest anyone thinking about it, to jump on this deal as steel tubing prices have skyrocketed.

cut zee roof *if* I ever get that far

BJerolimic · Post by **BJerolimic** » Wed Mar 21, 2012 8:12 pm

Sale pending

edw1 · Post by **edw1** » Thu Mar 22, 2012 6:15 am

BJerolimic wrote:Sale pending

Let me know when I can attack your roof with the plasma cutter.

New Jersey BMW CCA

Brand New TC Kline Bolt In Roll Bar e36 Coupe/Sedan

Brand New TC Kline Bolt In Roll Bar e36 Coupe/Sedan

Re: Brand New TC Kline Bolt In Roll Bar e36 Coupe/Sedan

Re: Brand New TC Kline Bolt In Roll Bar e36 Coupe/Sedan

Re: Brand New TC Kline Bolt In Roll Bar e36 Coupe/Sedan